Customization: | Available |
---|---|
After-sales Service: | Yes |
Warranty: | 1year |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
YSP-H Gas chromatography is a separation and analysis technology of multicomponent mixture. It mainly uses the differences of boiling point, polarity and adsorption coefficient of each component in the sample in the chromatographic column, so that each component can be separated in the chromatographic column, and qualitative and quantitative analysis of the separated components..The gas chromatography takes the gas as the flow phase (carrying gas), When the sample is fed into the sample inlet and vaporized, it is carried by carrier gas into the packed column or capillary column, due to the difference of boiling point, polarity and adsorption coefficient of each component in the sample, so that each component is separated in the column Then, according to the physicochemical characteristics of the components, the detector son-in-line will be detected in order, and finally through serial or network data transmission to the chromatography workstation, by the chromatography workstation will be each. component of the gas chromatography record and analysis to obtain the analysis of each component of the analysis.
Network anti-control system
|
Internal CAN's way, with interface board design, It can be converted to network port output at will
|
Signal output bits
|
24-bit
|
Communication interface
|
Network interface output(class 6 network cable connections)
|
Circuit design
|
ARM embedded design for easy wireless control, remote control and mobile app control
|
Temperature control system
|
Six-way independent temperature control
|
Temperature control
|
Room temperature - 450 , liquid nitrogen refrigeration: - 80 - 450
|
Column box temperature control accuracy
|
-0.02
|
Program heating up
|
Stage 13, 0.1 / stage
|
Show module
|
Large-screen LCD
|
Display accuracy
|
0.01
|
Lift rate of column and box
|
0-80 / min (adjustment increment 0.1 / min) up to 120 / min
|
Temperatu reprogrammed repeatability
|
≤1%
|
TCD Detector Sensitivity
|
S value ≥ 10000mv.ml/mg (benzene) )up to 12000 mv.ml/mg (benzene)
|
Baseline noise
|
≤ 8uv
|
Baseline Drift
|
≤20uv/30min
|
Detection limit of FID detector
|
≤3 x 10-12g/s(thanan)
|
Baseline noise
|
≤2 x 10-13A
|
Baseline Drift
|
≤5 x 10-13A
|
Detection limit of ECD detector
|
≤3 x 10-14g/s(r-666)
|
Baseline noise
|
≤1 x 10-13A
|
Baseline Drift
|
≤5 x 10-13A
|
Detection limit of FPD detector
|
≤2 x 10-11 g/s(Sulfur in methyl parathion)
|
Baseline noise
|
≤2 x 10-13A
|
Baseline Drift
|
≤4 x 10-13A
|
Extended
|
≤6 external events can be added
|
Automation engineering
|
Can be increased: automatic ignition function, automatic sampler connection, four-way flow pressure display function, optional
counter-control workstation to achieve counter-control |
Serial Number
|
Name
|
Amount
|
Serial Number
|
Name
|
Amount
|
1
|
Quantitative clamp
|
one
|
14
|
Output signal line
|
two
|
2
|
Polyethylene gas pipe
|
thirty meters
|
15
|
Nipper pliers
|
one
|
3
|
Gas injector
|
one
|
16
|
Screwdriver
|
one
|
4
|
Pneumatic nut
|
one
|
17
|
Small screwdriver
|
one
|
5
|
Gas circuit gasket
|
twenty
|
18
|
Wrench (12*14)
|
two
|
6
|
Graphite pad Φ3.1
|
eight
|
19
|
Wrench (8*10)
|
one
|
7
|
Graphite pad Φ5.1
|
four
|
20
|
Screw (M3*6)
|
ten
|
8
|
Injector seal
|
thirty
|
21
|
Flat (Φ3)
|
ten
|
9
|
Gas path
|
three
|
22
|
Copper mesh (Φ3)
|
one
|
10
|
Gas tee
|
four
|
23
|
Combined grounding wire
|
one
|
11
|
Column nut
|
four
|
24
|
Specification
|
one
|
12
|
Fuse (2A, 8A)
|
six
|
25
|
Inspection Report
|
one
|
13
|
Fuse plate
|
two
|
26
|
Certification
|
one
|
1. How can I choose the suitable one?
Dear customer, please tell us your detailed requirements by mail or online, we will recommend the suitable one as your request.
2.What is the mini order quantity?
MOQ: generally 1 unit/piece/set
3. How can I pay?
Dear customer, we accept many payment term, such as T/T, Western Union...
4.Is will be broken during transport?
Dear customer, please do not worry, we do standard export package.
5.What should I do if I do not know how to use?
Dear customer, please do not worry, manual user will be sent together, you can also contact us with more technological support.