High Accuracy Oil Tan Delta Tester Oil Dissipation Factor Analyzer Oil Dielectric Loss Tester

• Customization: Available
• After-sales Service: Yes
• Warranty: 1year
• Model NO.: YJS-H
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Control: Computer Control
• Weight: 0-100Kg
• Power Source: AC220V
• Temperature Controlled Induction: Max Power 500W Furnace
• Temperature Control Time: Reach90c,Less Than20min
• Dimension: 450*310*60(mm)
• Customized Support: Oemodmobm
• Product Name: Yjs-H Insulating Oil Tan Delta Tester
• Work Condition: -15c~40crh<80%
• Model: Yjs-H
• Temperature Control Range: <100c
• Power: Electronic
• Certificate: Ceiso
• Resolution: 0.1c
• Temperature Control Error: 0.5c
• Transport Package: Plywood
• Trademark: HUAYI
• Origin: Hubei, China

Product Description

Product Description

Introduction

 

Insulating oil dielectric tester is high accuracy equipment applies to test the loss and volume resistance ratio of insulating oil and others insulating liquid. It is composed of insulating loss oil cup, temperature controller, temperature sensor, insulating loss testing bridge, AC testing power source, standard capacitor, heating method which with the features: oil cup non-contact with heating member, homogeneous heating, high-resistance recording, DC HV power, etc. It uses the best advanced high frequency inductance fast speed, easy to control. The AV test power adopts AC-DC-AC conversion mode, which avoid the The internal standard capacitor is SF6 gas filled three pole capacitor; it is difficult effected by temperature, influence of voltage and frequency fluctuation on the accuracy of dielectric loss test. It can still work even

if generator supply power. humidity, to ensure the device in accuracy after used for long time.

 

Features

1 The device adopts digital technique, intelligent and automatically test. 2 Equipped with 240x180 LCD. 3 Can print the test results, the operators can skillful use without vocational training

Technology Parameters

Product Name	YJS-H Insulating Oil Tan Delta Tester
Work condition	-1540;RH80%
Power supply	AC 220V±10%, no limited frequency
AC high voltage output	400V2200V ±2% ,every100V 50VA
DC high voltage output	200V600V ±2%,every50V
Temperature controlled induction furnace	Max power 500W
Temperature control range	<100
Temperature control error	±0.5
Temperature measurement resolution	0.1
Temperature control time	Reach90, less than20min
Measurement time	Tgδno limited
		Cx15PF-300PF
		Rx10M-20T
Resolution	△ tgδ0.001%
		△ Cx 0.01pF
		△ Rx 0.01
Accuracy	△ tgδ±(reading*0.5%+0.020%)
		△ Cx ±(reading*0.5%+0.5PF)
		△ Rx ±reading * 10%
Relative dielectric constant	εr Auto calculate based on Cx, same accuracy as Cx
Volume resistance rate	ρAuto calculate based on Rx, same accuracy as Rx
Dimension	450×310×360mm)
Weight	18Kg

Accessory

Serial Number	Name	Amount
1	Mainframe	one
2	Oil cup	one
3	Test temperature line connector	two
4	Data acquisition line	one
5	2KV High voltage test line for inspection	one
6	Test line for inspection	one
7	Power line	one
8	Measuring cup (50ml)	one
9	Printing paper	one
10	Specification	one
11	Inspection Report	one
12	Certification	one

Products Show

Our Company

 

About HUAYI

Wuhan HUAYI Electric was founded in 2005, located in Wuhan City, China. We are a professional manufacturer of electric testing equipment with over 15 years industry experience, engaged in high voltage tester with high performance, good quality, customized specification and easy operation. ISO qualified factory, strong R&D team and after-sales engineers make us gain good feedback from wide customers. HUAYI is committed to preventative, maintenance, troubleshooting and commissioning all the time. Our products are involved inAC/DC Hipot tester,series resonant test system, transformer tester, relay tester, circuit breaker/switch tester, oil/SF6 tester,cable testerand other electric instruments, widely adapted to electric power, water conservation, oil, railway, mine, chemical.

Production Line

We are professional manufacturer in China, have own production line and R&D team, providing best price and quality.

 

Filed Test&Service

 

 

 

Packing & Delivery

 

 

 

 

Our Certifications

FAQ

1. How can I choose the suitable one?
Dear customer, please tell us your detailed requirements by mail or online, we will recommend the suitable one as your request.

2.What is the mini order quantity?
MOQ: generally 1 unit/piece/set
3. How can I pay?
Dear customer, we accept many payment term, such as T/T, Western Union...

4.Is will be broken during transport?
Dear customer, please do not worry, we do standard export package.

5.What should I do if I do not know how to use?
Dear customer, please do not worry, manual user will be sent together, you can also contact us with more technological support.