300kv 100mA DC Hipot Tester Hv Testing Equipment Manufacturer From China

• Customization: Available
• After-sales Service: Yes
• Warranty: 1 Year
• Model NO.: ZGS
• Load Way: Electronic Load
• Loading Method: Static Load
• Display: Digital
• Control: Manual Control
• Weight: 0-100Kg
• Power Source: AC220V
• Temperature: -10~40c
• Output Current: 20mA
• Packaging Details: Carton or Wooden Case 200kv 5mA DC Hipot Generator
• Ripple Tactor: 0.5%
• Power Supply: 220V
• Ripple Factor: 0.5%
• Supply Ability: 10 Acre/Acres Per Week
• Customized Support: Oemodmobm
• Accuracy of Output Current: <1
• Product Name: DC Hipot Test Set
• Accuracy of Output Voltage: 1
• Output Voltage: 20kv
• Support: OEM,Distributor,Wholesales
• Power: Electronic
• Altitude: Less Than 1500m
• Transport Package: Carton or Wooden Case 200kv 5mA DC Hipot Generator
• Trademark: HUAYI
• Origin: Hubei, China
• Production Capacity: 10 Acre/Acres Per Week

Product Description

Product Description

Introduction

This product adopts new technique, new material and new component with features of high output power, small volume, light weight,etc. And it is with the function of stable over-voltage, over-current, zero position switching protection, 0.75 times voltage latch function, equipped with time relay, can set audio alarm when testing. The whole device is reliable, easy to operate and carry, especially applies to the power department field tests.

Application 1. Conductivity current test for valve arrester 2. DC withstand voltage test and leakage current measurement for power transformer 3. DC withstand voltage test and leakage current measurement for high voltage cable (35~500kV and below) 4. U1mA DC reference voltage test and 0.75U1mA leakage current test for zinc oxide arrester

Features

1. High precision and accurate measurement. Voltmeter on control cabinet display the voltage applied to load tested equipment. No need to add voltage divider, easy to wire. Equipped with high and low voltage end to measure leakage current. High voltage end adopts round shield digital indication displaying, not worrying discharge shock. It has excellent anti-jam function, which suitable for field operation.
2. With stable voltage regulation, the regulation is smooth at whole range. The output voltage regulation adopts imported single multiturn potentiometer. Stable boost process and high accurate adjustment.
3. With negative polarity output, zero start, continuous adjustment, over-voltage, over-current, zero position, grounding
protection, special break-line protection functions. It can protect circuit automatically, perfect and reliable protection make
safe operation.
4. Adopt advanced technology, medium frequency circuit and latest PWM pulse width modulation technology and high power IGBT, which make more stable high voltage output and smaller ripple factor.
5. With 0.75 times voltage conversion, convenient to test Zinc Oxide arrester.
6. Over-voltage setting use digital dial switch, displaying data directly and visually (unit KV).
7. The sampling adopts special nanosecond sensor and nanosecond optical isolation element, which can quickly and completely shut off the DC main circuit to protect the instrument from damage.
8. The cylinder adopts new material, light and stable. With 3 support feet at bottom, increase the stability. The outer surface of the cylinder is coated with special insulation materials, good electrical performance, strong moisture capacity, no leakage.
9. Case is made of aluminum alloy with small volume, light weight, good appearance, more stable, easy to operate, full function, convenient to use on site.

Technology Parameters

Specification	60/2	60/3	60/5	120/2	120/3
Rated(kV)	60	60	60	120	120
Rated(mA)	2	3	5	2	3
Rated power(W)	120	180	300	240	360
Weight(kg)	9			10
Volume(mm3)	465*390*190			565*390*190
Voltage cylinder height(mm)	440			535
Accuracy of output voltage	±(1.0%R±2D)
Accuracy of output current	±(1.0%R±2D)
Ripple factor	≤0.5%
Working mode	Intermittent use, 30 minutes under rated load
Over-load capacity	The no-load voltage can exceed the rated voltage 10% for 10 minutes
	The maximum charge current is 1.25 times of the rated current
Power	AC220V±10% 50HZ
Service conditions	Temperature: -10-40ºC
	Relative humidity: less than 85% under 25ºC, without moisture
	Altitude:less than 1500M

 

Accessory

 

Serial Number	Name	Amount	Serial Number	Name	Amount
1	Control cabinet	one	7	Fuse	two
2	High pressure doubler	one	8	Ground lead	one
3	High voltage cable	two	9	Micro-ampere meter	one
4	Discharging rod	one	10	Specification	one
5	Water resistance	one	11	Inspection Report	one
6	Power line	one	12	Certification	one

Products Show

Our Company

About HUAYI

Wuhan HUAYI Electric was founded in 2005, located in Wuhan City, China. We are a professional manufacturer of electric testing equipment with over 15 years industry experience, engaged in high voltage tester with high performance, good quality, customized specification and easy operation. ISO qualified factory, strong R&D team and after-sales engineers make us gain good feedback from wide customers. HUAYI is committed to preventative, maintenance, troubleshooting and commissioning all the time. Our products are involved inAC/DC Hipot tester,series resonant test system, transformer tester, relay tester, circuit breaker/switch tester, oil/SF6 tester,cable testerand other electric instruments, widely adapted to electric power, water conservation, oil, railway, mine, chemical.

 

Production Line

We are professional manufacturer in China, have own production line and R&D team, providing best price and quality.

 

Filed Test&Service

 

 

Packing & Delivery

 

 

 

 

Our Certifications

FAQ

1. How can I choose the suitable one?
Dear customer, please tell us your detailed requirements by mail or online, we will recommend the suitable one as your request.

2.What is the mini order quantity?
MOQ: generally 1 unit/piece/set
3. How can I pay?
Dear customer, we accept many payment term, such as T/T, Western Union...

4.Is will be broken during transport?
Dear customer, please do not worry, we do standard export package.

5.What should I do if I do not know how to use?
Dear customer, please do not worry, manual user will be sent together, you can also contact us with more technological support.